To order, call 541-704-2299 or Fax 541-704-2388 | Email
- Accessories to Nitrogen Gas Units
Installing the Almond Compression Gland Gasket and Insert
This tutorial is to change your existing Compression Gland and fit it with a Compression Gland Almond Insert and Gasket. The four parts shown are: Compression Gland Lid fitted with 1/4 inch Compression Gland Gasket/Insert (top) Almond Compression...Installing the Grass Compression Gland
Watch this tutorial on YouTube You will first need to remove the current Compression Gland System from the chamber lid. This can be done by simply unscrewing the Compression Gland Screw and then removing the...Pressure Regulators: Do I need one?
US Nitrogen Standards Since May of 2011 our instruments have been designed and engineered to connect directly to a 207 bar/ 3000 psi cylinder. If you bought your instrument prior to this date the instrument...Sealing a sample using inserts, gaskets and tools
This sealing system is our original system and has since been updated with the Compression Gland Cover which is standard in all of our Pressure Chambers. This system uses a series of various...Using the Grass Compression Gland
Watch this video on YouTube The Grass Compression Gland can be used to seal samples of bladed grass. If the grass is has a rounded blade, you can use the regular Compression Gland. The...Using the Grass Compression Gland with corn
Watch this video on YouTube The Grass Compression Gland can be used to seal corn or “maiz” leaves also. When testing young corn leaves they might pass through without any effort or modification of the leaf....